*** MIDAS logfile (05SEPpl1.2) *** Fr, 16 Feb 2007 16:02:20 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 16 Feb 2007 16:02:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 070216 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.56 stddev = 3.24 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_070216 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 2048.2 2049.6 758.1 0.03 0.02 2.70 2 8.41 4019.9 4021.8 1453.5 0.02 0.04 2.77 3 16.81 7954.6 7954.2 2849.7 -0.09 -0.11 2.79 4 25.21 11894.1 11893.3 4329.0 -0.09 -0.10 2.75 5 37.82 17812.1 17807.8 6428.4 -0.07 -0.09 2.77 6 50.42 23733.3 23734.1 8614.5 -0.02 -0.01 2.76 7 63.03 29669.7 29667.6 10982.1 0.04 0.04 2.70 8 84.04 39546.7 39546.4 14233.8 0.07 0.08 2.78 9 105.05 49412.5 49410.0 17477.8 0.06 0.07 2.83 10 126.05 59264.4 59267.1 21492.7 0.04 0.06 2.76 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 5700 to 164874 e- Average count rate measured: 469 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.78 +/- 0.02 e-/ADU RON = 9.03 +/- 0.07 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.154 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.07/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay