*** MIDAS logfile (05SEPpl1.2) *** Fr, 06 Oct 2006 15:41:33 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 06 Oct 2006 15:42:21 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 061006 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 607.72 stddev = 3.57 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_061006 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 2122.0 2122.8 788.8 0.02 0.02 2.69 2 8.41 4167.9 4167.7 1524.6 0.04 0.02 2.73 3 16.81 8248.2 8249.6 2957.1 -0.09 -0.08 2.79 4 25.21 12332.7 12334.6 4433.5 -0.10 -0.09 2.78 5 37.82 18472.9 18471.1 6626.7 -0.06 -0.07 2.79 6 50.42 24617.7 24615.4 8942.1 -0.00 -0.01 2.75 7 63.03 30768.8 30770.9 11276.1 0.04 0.05 2.73 8 84.04 41014.0 41012.9 14811.8 0.07 0.07 2.77 9 105.05 51237.3 51236.4 18162.5 0.05 0.05 2.82 10 126.05 61459.1 61457.9 22090.7 0.04 0.04 2.78 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 5928 to 171664 e- Average count rate measured: 487 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.79 +/- 0.02 e-/ADU RON = 9.98 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.149 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.07/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay