*** MIDAS logfile (05SEPpl1.2) *** Fr, 24 Feb 2006 15:42:11 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 24 Feb 2006 15:43:06 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 060224 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 607.41 stddev = 3.14 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_060224 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 2127.1 2131.6 789.5 0.00 0.04 2.69 2 8.41 4186.5 4185.0 1519.8 0.08 -0.03 2.75 3 16.81 8287.0 8289.0 2986.0 -0.10 -0.09 2.78 4 25.21 12394.5 12393.4 4519.8 -0.10 -0.11 2.74 5 37.82 18567.4 18566.1 6736.3 -0.07 -0.07 2.76 6 50.42 24747.7 24747.7 8925.5 -0.00 0.01 2.77 7 63.03 30936.9 30932.5 11315.9 0.05 0.05 2.73 8 84.04 41235.5 41230.2 14798.2 0.07 0.08 2.79 9 105.05 51516.3 51518.8 18328.3 0.05 0.08 2.81 10 126.05 61782.5 61778.4 21855.9 0.02 0.04 2.83 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 6009 to 174342 e- Average count rate measured: 489 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.82 +/- 0.02 e-/ADU RON = 8.85 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.139 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.11 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay