*** MIDAS logfile (05SEPpl1.2) *** Fr, 17 Feb 2006 17:36:49 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 17 Feb 2006 17:37:46 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 060217 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 607.50 stddev = 3.01 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_060217 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 2112.3 2109.5 785.4 0.04 0.02 2.69 2 8.41 4150.8 4150.0 1516.1 -0.01 0.03 2.74 3 16.81 8220.6 8219.9 3007.8 -0.12 -0.11 2.73 4 25.21 12294.0 12298.8 4466.5 -0.12 -0.08 2.75 5 37.82 18420.9 18419.0 6691.5 -0.06 -0.08 2.75 6 50.42 24551.5 24555.9 8991.0 -0.00 0.01 2.73 7 63.03 30691.5 30690.6 11197.1 0.05 0.04 2.74 8 84.04 40914.9 40914.9 14739.0 0.09 0.08 2.78 9 105.05 51118.2 51117.1 18383.0 0.07 0.06 2.78 10 126.05 61309.6 61309.9 21911.3 0.05 0.04 2.80 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 5900 to 171361 e- Average count rate measured: 486 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.80 +/- 0.01 e-/ADU RON = 8.42 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.135 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.12 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay