*** MIDAS logfile (05SEPpl1.2) *** Fr, 03 Feb 2006 17:43:02 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 03 Feb 2006 17:43:54 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 060203 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 607.93 stddev = 3.31 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_060203 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1244.5 1245.7 465.8 -0.02 0.00 2.67 2 8.41 2449.8 2449.2 880.3 0.10 0.04 2.78 3 16.81 4848.8 4851.5 1777.0 -0.07 -0.03 2.73 4 25.21 7253.1 7252.5 2565.2 -0.06 -0.08 2.83 5 37.82 10860.7 10860.7 3892.4 -0.07 -0.07 2.79 6 50.42 14466.9 14468.3 5154.7 -0.06 -0.05 2.81 7 63.03 18078.4 18081.0 6528.3 -0.04 -0.03 2.77 8 84.04 24111.6 24111.2 8745.4 0.04 0.04 2.76 9 105.05 30135.5 30138.7 10821.3 0.06 0.07 2.78 10 126.05 36171.4 36171.3 13064.9 0.11 0.12 2.77 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3451 to 100247 e- Average count rate measured: 286 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.77 +/- 0.01 e-/ADU RON = 9.16 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.139 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.08 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay