*** MIDAS logfile (03SEPpl1.2) *** Fr, 28 Oct 2005 16:02:38 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 28 Oct 2005 16:03:52 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 051028 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 608.71 stddev = 3.36 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_051028 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1281.3 1284.1 475.3 -0.03 0.03 2.70 2 8.41 2521.2 2521.0 928.0 0.08 0.00 2.72 3 16.81 4993.1 4993.7 1857.9 -0.02 -0.03 2.69 4 25.21 7465.0 7464.9 2681.7 -0.05 -0.07 2.78 5 37.82 11174.2 11177.3 4069.6 -0.09 -0.06 2.75 6 50.42 14887.5 14886.6 5365.3 -0.06 -0.06 2.77 7 63.03 18605.0 18605.2 6800.1 -0.04 -0.03 2.74 8 84.04 24807.8 24807.5 9004.8 0.02 0.03 2.75 9 105.05 31016.0 31015.4 11257.2 0.08 0.09 2.76 10 126.05 37216.4 37213.2 13688.1 0.10 0.10 2.72 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3509 to 101816 e- Average count rate measured: 295 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.74 +/- 0.01 e-/ADU RON = 9.18 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.144 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.08 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay