*** MIDAS logfile (03SEPpl1.2) *** Fr, 21 Oct 2005 14:17:59 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 21 Oct 2005 14:18:55 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 051021 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.16 stddev = 3.44 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_051021 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1282.9 1284.1 484.4 0.01 0.03 2.65 2 8.41 2521.4 2520.7 920.0 0.05 -0.00 2.74 3 16.81 4992.4 4991.6 1829.7 -0.05 -0.07 2.73 4 25.21 7463.6 7463.9 2714.4 -0.08 -0.07 2.75 5 37.82 11176.9 11174.3 4048.3 -0.07 -0.09 2.76 6 50.42 14888.2 14887.6 5445.2 -0.06 -0.05 2.73 7 63.03 18606.0 18604.2 6826.6 -0.03 -0.03 2.73 8 84.04 24808.1 24808.8 9200.7 0.02 0.04 2.70 9 105.05 31025.6 31021.5 11417.8 0.11 0.11 2.72 10 126.05 37223.2 37222.8 13413.1 0.12 0.13 2.78 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3523 to 102169 e- Average count rate measured: 295 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.74 +/- 0.02 e-/ADU RON = 9.45 +/- 0.06 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.146 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay