*** MIDAS logfile (03SEPpl1.2) *** Tu, 26 Oct 2004 15:14:09 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Tu, 26 Oct 2004 15:15:11 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 041026 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.26 stddev = 5.53 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_041026 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1408.0 1407.5 542.4 0.00 0.02 2.60 2 8.41 2767.9 2765.8 1033.8 0.05 0.00 2.68 3 16.81 5480.5 5481.3 1985.7 -0.06 -0.03 2.76 4 25.21 8193.6 8194.5 2961.7 -0.08 -0.07 2.77 5 37.82 12268.8 12270.5 4470.4 -0.09 -0.07 2.74 6 50.42 16344.8 16345.5 5959.1 -0.06 -0.06 2.74 7 63.03 20429.5 20427.9 7418.2 -0.02 -0.03 2.75 8 84.04 27242.3 27243.0 9978.0 0.05 0.05 2.73 9 105.05 34057.0 34054.3 12403.3 0.09 0.08 2.75 10 126.05 40861.7 40859.7 14873.6 0.11 0.10 2.75 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3867 to 112232 e- Average count rate measured: 323 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.75 +/- 0.00 e-/ADU RON = 15.19 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.141 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.08 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay