*** MIDAS logfile (03SEPpl1.2) *** Mo, 18 Oct 2004 14:50:13 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Mo, 18 Oct 2004 14:51:16 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 041018 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 607.42 stddev = 5.80 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_041018 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1414.5 1414.8 549.9 0.02 0.03 2.57 2 8.41 2778.7 2778.5 1040.1 0.02 0.01 2.67 3 16.81 5501.3 5501.6 2030.4 -0.08 -0.07 2.71 4 25.21 8227.6 8226.6 3009.7 -0.07 -0.08 2.73 5 37.82 12317.8 12317.3 4461.4 -0.08 -0.08 2.76 6 50.42 16410.0 16409.5 6002.3 -0.06 -0.06 2.73 7 63.03 20511.1 20511.9 7567.3 -0.01 -0.01 2.71 8 84.04 27348.7 27349.0 9993.7 0.04 0.05 2.74 9 105.05 34197.6 34196.0 12549.4 0.11 0.11 2.73 10 126.05 41017.0 41016.0 14796.6 0.10 0.10 2.77 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3899 to 113057 e- Average count rate measured: 325 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.76 +/- 0.01 e-/ADU RON = 16.00 +/- 0.07 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.145 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.08 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay