*** MIDAS logfile (03SEPpl1.2) *** Fr, 08 Oct 2004 17:17:50 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 08 Oct 2004 17:19:04 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 041008 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.03 stddev = 3.13 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_041008 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1422.4 1422.9 531.4 0.04 0.04 2.68 2 8.41 2791.8 2792.1 1018.4 -0.03 -0.03 2.74 3 16.81 5532.2 5531.5 2015.8 -0.04 -0.05 2.74 4 25.21 8268.7 8267.6 2986.1 -0.09 -0.10 2.77 5 37.82 12382.1 12383.1 4495.8 -0.08 -0.07 2.75 6 50.42 16497.7 16493.6 5998.5 -0.04 -0.06 2.75 7 63.03 20616.5 20617.2 7575.2 -0.02 -0.01 2.72 8 84.04 27491.2 27493.2 9887.7 0.05 0.06 2.78 9 105.05 34374.6 34368.4 12456.9 0.11 0.11 2.76 10 126.05 41233.7 41227.8 14908.5 0.11 0.10 2.77 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3936 to 114079 e- Average count rate measured: 326 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.77 +/- 0.01 e-/ADU RON = 8.65 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.147 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay