*** MIDAS logfile (03SEPpl1.2) *** Th, 07 Oct 2004 20:11:02 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Th, 07 Oct 2004 20:12:13 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 041007 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 606.74 stddev = 5.45 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_041007 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1412.4 1414.9 539.6 0.01 0.04 2.62 2 8.41 2776.3 2775.7 1043.4 0.06 -0.02 2.66 3 16.81 5496.5 5498.5 2041.7 -0.05 -0.04 2.69 4 25.21 8217.5 8217.7 3012.7 -0.08 -0.09 2.73 5 37.82 12304.8 12303.3 4546.0 -0.08 -0.09 2.71 6 50.42 16391.7 16392.3 5987.1 -0.06 -0.05 2.74 7 63.03 20488.5 20489.0 7451.3 -0.02 -0.00 2.75 8 84.04 27321.1 27318.3 10050.6 0.05 0.05 2.72 9 105.05 34148.2 34147.4 12294.1 0.08 0.09 2.78 10 126.05 40975.4 40969.2 15119.8 0.10 0.10 2.71 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3872 to 112218 e- Average count rate measured: 324 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.74 +/- 0.02 e-/ADU RON = 14.91 +/- 0.09 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.147 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay