*** MIDAS logfile (03SEPpl1.2) *** Su, 03 Oct 2004 17:43:21 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 03 Oct 2004 17:44:23 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 041003 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.66 stddev = 3.81 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_041003 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1414.7 1416.0 525.1 0.00 0.01 2.69 2 8.41 2783.7 2782.8 1023.4 0.09 0.02 2.72 3 16.81 5510.8 5511.1 2006.1 -0.07 -0.07 2.75 4 25.21 8242.6 8242.9 3007.1 -0.06 -0.06 2.74 5 37.82 12337.6 12340.1 4470.0 -0.10 -0.08 2.76 6 50.42 16437.9 16439.5 5975.8 -0.07 -0.06 2.75 7 63.03 20548.6 20547.1 7431.1 -0.02 -0.02 2.77 8 84.04 27401.1 27402.7 9910.9 0.04 0.06 2.76 9 105.05 34254.5 34254.4 12395.0 0.09 0.09 2.76 10 126.05 41100.9 41098.4 14831.9 0.10 0.11 2.77 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3923 to 113930 e- Average count rate measured: 325 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.77 +/- 0.00 e-/ADU RON = 10.55 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.140 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay