*** MIDAS logfile (vers. 02FEBpl1.0) *** Th, 19 Jun 2003 17:36:20 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** Th, 19 Jun 2003 17:37:18 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 030619 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.39 stddev = 3.15 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_030619 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1580.7 1579.2 583.1 0.04 0.01 2.71 2 8.41 3104.1 3104.7 1130.8 0.01 0.05 2.75 3 16.81 6146.6 6146.0 2262.1 -0.08 -0.08 2.72 4 25.21 9191.4 9191.1 3359.0 -0.08 -0.08 2.74 5 37.82 13762.0 13764.8 5012.5 -0.09 -0.07 2.75 6 50.42 18336.4 18338.6 6766.5 -0.05 -0.04 2.71 7 63.03 22920.0 22920.8 8456.3 -0.00 -0.00 2.71 8 84.04 30565.2 30564.4 11160.4 0.07 0.06 2.74 9 105.05 38204.6 38201.4 13833.8 0.10 0.09 2.76 10 126.05 45826.7 45821.8 16636.1 0.09 0.07 2.75 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4354 to 126288 e- Average count rate measured: 363 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.76 +/- 0.01 e-/ADU RON = 8.69 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.143 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.09/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay