*** MIDAS logfile (vers. 02FEBpl1.0) *** Sa, 01 Feb 2003 16:03:44 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** Sa, 01 Feb 2003 16:04:22 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 030201 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.48 stddev = 3.41 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_030201 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1631.9 1631.3 591.7 0.01 0.02 2.76 2 8.41 3208.2 3205.5 1177.6 0.07 0.00 2.72 3 16.81 6349.3 6352.1 2324.5 -0.09 -0.03 2.73 4 25.21 9494.0 9496.2 3368.3 -0.10 -0.07 2.82 5 37.82 14216.5 14217.6 5094.5 -0.10 -0.09 2.79 6 50.42 18943.4 18942.9 6814.2 -0.05 -0.05 2.78 7 63.03 23682.9 23679.1 8593.8 0.01 0.00 2.76 8 84.04 31576.8 31575.3 11500.4 0.07 0.06 2.75 9 105.05 39465.9 39465.5 14151.5 0.09 0.09 2.79 10 126.05 47344.0 47340.4 17095.3 0.09 0.08 2.77 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4522 to 131198 e- Average count rate measured: 375 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.77 +/- 0.01 e-/ADU RON = 9.46 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.142 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.09/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay