*** MIDAS logfile (vers. 02FEBpl1.0) *** Th, 14 Nov 2002 03:09:26 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** Th, 14 Nov 2002 03:10:07 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 021114 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.35 stddev = 3.25 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_021114 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1668.7 1667.9 612.7 0.03 0.03 2.72 2 8.41 3278.6 3276.6 1180.0 0.03 -0.01 2.78 3 16.81 6489.6 6491.5 2369.5 -0.11 -0.07 2.74 4 25.21 9704.7 9708.3 3490.8 -0.11 -0.07 2.78 5 37.82 14536.1 14534.4 5285.7 -0.08 -0.09 2.75 6 50.42 19367.4 19365.8 7033.1 -0.04 -0.05 2.75 7 63.03 24209.9 24209.8 8859.7 0.01 0.01 2.73 8 84.04 32286.3 32283.8 11532.6 0.08 0.07 2.80 9 105.05 40345.6 40345.9 14454.1 0.09 0.09 2.79 10 126.05 48404.6 48404.3 17223.8 0.10 0.09 2.81 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4682 to 135856 e- Average count rate measured: 383 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.81 +/- 0.01 e-/ADU RON = 9.13 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.142 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay