*** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 15 Oct 2002 13:51:14 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 15 Oct 2002 13:51:52 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 021015 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 608.97 stddev = 3.29 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_021015 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1677.6 1677.3 614.2 0.02 0.01 2.73 2 8.41 3297.8 3298.5 1223.3 0.02 0.03 2.70 3 16.81 6531.6 6534.9 2366.5 -0.09 -0.04 2.76 4 25.21 9771.0 9767.5 3628.5 -0.07 -0.11 2.69 5 37.82 14629.6 14630.4 5348.3 -0.08 -0.08 2.74 6 50.42 19494.6 19494.5 6992.0 -0.04 -0.04 2.79 7 63.03 24369.3 24368.9 8838.1 0.01 0.01 2.76 8 84.04 32493.5 32492.2 11846.6 0.07 0.06 2.74 9 105.05 40604.1 40611.1 14650.7 0.07 0.09 2.77 10 126.05 48713.6 48710.7 17507.9 0.08 0.07 2.78 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4663 to 135413 e- Average count rate measured: 386 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.78 +/- 0.01 e-/ADU RON = 9.14 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.138 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay