*** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 08 Oct 2002 16:26:44 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 08 Oct 2002 16:27:22 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 021008 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.20 stddev = 3.40 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_021008 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1672.1 1671.5 626.2 0.05 0.02 2.67 2 8.41 3284.4 3285.7 1202.1 -0.01 0.04 2.73 3 16.81 6506.4 6506.1 2343.4 -0.07 -0.07 2.78 4 25.21 9726.9 9728.2 3572.0 -0.11 -0.09 2.72 5 37.82 14568.7 14568.6 5554.9 -0.09 -0.09 2.62 6 50.42 19413.9 19410.7 7029.9 -0.04 -0.05 2.76 7 63.03 24267.1 24266.3 8941.1 0.01 0.01 2.71 8 84.04 32359.4 32358.3 11674.9 0.07 0.07 2.77 9 105.05 40446.1 40441.5 14689.3 0.10 0.09 2.75 10 126.05 48517.1 48509.6 17613.1 0.09 0.08 2.75 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4618 to 133998 e- Average count rate measured: 384 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.76 +/- 0.02 e-/ADU RON = 9.38 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.141 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay