*** MIDAS logfile (vers. 02FEBpl1.0) *** Fr, 26 Jul 2002 04:17:07 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** Fr, 26 Jul 2002 04:17:41 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 020726 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 607.80 stddev = 3.39 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_020726 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1720.4 1718.1 642.7 0.07 0.03 2.68 2 8.41 3371.9 3372.0 1284.6 -0.05 0.00 2.62 3 16.81 6677.2 6677.6 2472.5 -0.07 -0.05 2.70 4 25.21 9978.2 9979.2 3598.0 -0.12 -0.11 2.77 5 37.82 14942.8 14943.8 5491.9 -0.10 -0.09 2.72 6 50.42 19910.8 19913.0 7282.4 -0.04 -0.04 2.73 7 63.03 24890.8 24893.2 8984.3 0.02 0.02 2.77 8 84.04 33192.7 33192.8 12044.4 0.09 0.08 2.76 9 105.05 41476.6 41477.1 15080.8 0.10 0.09 2.75 10 126.05 49757.2 49750.5 17775.8 0.10 0.07 2.80 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4792 to 138666 e- Average count rate measured: 394 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.79 +/- 0.01 e-/ADU RON = 9.44 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.152 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.09/-0.12 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay