*** MIDAS logfile (vers. 02FEBpl1.0) *** We, 24 Jul 2002 10:23:48 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** We, 24 Jul 2002 10:24:30 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 020724 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 607.15 stddev = 3.40 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_020724 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1724.4 1725.3 637.1 0.05 0.03 2.71 2 8.41 3382.1 3385.1 1229.0 -0.03 0.02 2.75 3 16.81 6698.4 6697.2 2416.6 -0.06 -0.10 2.77 4 25.21 10012.2 10013.9 3616.9 -0.09 -0.09 2.77 5 37.82 14991.0 14992.7 5528.0 -0.09 -0.09 2.71 6 50.42 19973.9 19976.8 7446.3 -0.04 -0.04 2.68 7 63.03 24966.4 24968.7 9085.3 0.00 0.01 2.75 8 84.04 33294.5 33297.2 12441.5 0.08 0.08 2.68 9 105.05 41603.2 41605.2 15206.4 0.08 0.08 2.74 10 126.05 49913.1 49913.0 18067.3 0.09 0.09 2.76 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4726 to 136766 e- Average count rate measured: 395 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.74 +/- 0.02 e-/ADU RON = 9.30 +/- 0.07 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.153 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.09/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay