*** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 18 Jul 2002 14:48:43 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 18 Jul 2002 14:49:21 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 020718 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 608.40 stddev = 3.29 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_020718 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1703.7 1707.6 685.0 0.03 0.07 2.49 2 8.41 3347.7 3348.4 1228.4 0.00 -0.07 2.73 3 16.81 6632.5 6633.1 2402.4 -0.07 -0.09 2.76 4 25.22 9922.7 9920.5 3562.0 -0.08 -0.11 2.79 5 37.82 14854.8 14855.5 5419.0 -0.07 -0.06 2.74 6 50.43 19791.8 19793.8 7113.0 -0.06 -0.04 2.78 7 63.03 24742.5 24741.3 8955.4 0.02 0.03 2.76 8 84.04 32988.3 32981.5 12065.6 0.07 0.07 2.73 9 105.05 41236.4 41236.2 14677.6 0.11 0.13 2.81 10 126.06 49451.6 49447.3 17723.4 0.06 0.08 2.79 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4767 to 138210 e- Average count rate measured: 392 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.79 +/- 0.01 e-/ADU RON = 9.19 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.144 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.12/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay