*** MIDAS logfile (vers. 01FEBpl1.1) *** Tu, 09 Jul 2002 17:14:32 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Tu, 09 Jul 2002 17:15:18 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 020709 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 609.38 stddev = 3.24 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_020709 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1723.3 1725.3 774.8 0.01 0.08 2.22 2 8.41 3387.8 3384.3 1235.6 0.05 -0.07 2.74 3 16.81 6707.7 6707.4 2461.4 -0.06 -0.07 2.73 4 25.22 10033.3 10030.8 3599.6 -0.09 -0.10 2.79 5 37.82 15016.6 15016.4 5439.8 -0.09 -0.08 2.76 6 50.43 20014.6 20014.6 7337.7 -0.05 -0.03 2.73 7 63.03 25014.9 25014.9 9227.2 0.01 0.02 2.71 8 84.04 33354.0 33351.6 12123.2 0.07 0.08 2.75 9 105.05 41687.1 41686.2 15130.6 0.09 0.10 2.76 10 126.06 50001.8 50001.5 17983.1 0.07 0.08 2.78 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4787 to 138818 e- Average count rate measured: 396 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.78 +/- 0.01 e-/ADU RON = 9.01 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.143 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay