*** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 29 Jun 2002 19:53:36 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 29 Jun 2002 19:54:12 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 020629 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 608.02 stddev = 3.30 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_020629 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1726.0 1727.7 634.7 0.02 0.05 2.72 2 8.41 3390.4 3390.5 1237.2 0.03 -0.01 2.74 3 16.81 6712.9 6713.4 2436.5 -0.06 -0.08 2.76 4 25.21 10034.4 10036.0 3629.1 -0.11 -0.10 2.76 5 37.82 15026.5 15031.2 5533.6 -0.09 -0.07 2.72 6 50.42 20024.2 20027.0 7300.5 -0.04 -0.03 2.74 7 63.03 25030.6 25033.1 9178.5 0.01 0.02 2.73 8 84.04 33378.5 33376.8 12121.1 0.08 0.07 2.75 9 105.05 41706.3 41707.9 15126.8 0.08 0.08 2.76 10 126.05 50037.4 50032.1 18112.9 0.09 0.07 2.76 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4767 to 138119 e- Average count rate measured: 396 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.76 +/- 0.01 e-/ADU RON = 9.10 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.147 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay