During May 2004 the CES saw a major change. With the move of the Cassegrain end of the fiber to
the HARPS-CES Fiber Adapter (HCFA), the CES is now equipped with an Atmospheric Dispersion
Correcter and an iodine cell. Furthermore, the very time-efficient HARPS Calibration Unit (HCU)
significantly reduces overheads e.g. when taking ThAr exposures.
Having CES and HARPS in the same adapter significantly diminishes the time overhead when changing
from one instrument to the other. In fact, the complete change including software changes takes less
than 1 minute! However, the possibility of changing instrument during the night is
so far not offered.
Due to these changes, the observing templates were rewritten without backward
compatibility. This means that OB's from P73 and earlier will not work anymore. It also means that
the FITS headers have changed to include new information from the HCFA and from the HCU.
Also the file names have changed from the old style like "CES_Obs.23.fits" to the ESO standard
like "CES_hcfa_obs_all_0023.fits".
Below is an example of the new and old header for comparison. The main differences are:
- All INS keywords of the old header are now INS1 keywords, but otherwise the same.
- The keywords of the HCFA and HCU are included as INS2 keywords.
|
SIMPLE = T / Standard FITS format (NOST-100.0)
BITPIX = 16 / # of bits storing pix values
NAXIS = 2 / # of axes in frame
NAXIS1 = 1124 / # pixels/axis
NAXIS2 = 4096 / # pixels/axis
BZERO = 32768.0 / pixel=FITS*BSCALE+BZERO
BSCALE = 1.0 / pixel=FITS*BSCALE+BZERO
ORIGIN = 'TEST ' / European Southern Observatory
DATE = '2004-05-15T04:09:17.188' / UT date when this file was written
TELESCOP= 'ESO-3P6 ' / ESO Telescope Name
INSTRUME= 'CES ' / Instrument used.
OBJECT = 'HR4468 ' / Auto Added Keyword
RA = 174.168393 / 11:36:40.4 RA (J2000) pointing (deg)
DEC = -9.80428 / -09:48:15.4 DEC (J2000) pointing (deg)
EQUINOX = 2000. / Standard FK5 (years)
RADECSYS= 'FK5 ' / Coordinate reference frame
EXPTIME = 300.0073 / Total integration time
MJD-OBS = 53140.16984111 / MJD start (2004-05-15T04:04:34.271)
DATE-OBS= '2004-05-15T04:04:34.271' / Date of observation
UTC = 14643.000 / 04:04:03.000 UTC at start (sec)
LST = 53640.249 / 14:54:00.249 LST at start (sec)
PI-COI = 'UNKNOWN ' / Auto Added Keyword
OBSERVER= 'UNKNOWN ' / Auto Added Keyword
CTYPE1 = 'PIXEL ' / Pixel coordinate system
CTYPE2 = 'PIXEL ' / Pixel coordinate system
CRVAL1 = 1.0 / value of ref pixel
CRVAL2 = 1.0 / value of ref pixel
CRPIX1 = 1.0 / Ref. pixel of center of rotation
CRPIX2 = 1.0 / Ref. pixel of center of rotation
CDELT1 = 1.0 / Binning factor
CDELT2 = 1.0 / Binning factor
EXTEND = F / Extension may be present
HIERARCH ESO ADA ABSROT END = 89.96976 / Abs rot angle at exp end (deg)
HIERARCH ESO ADA ABSROT START= 89.96976 / Abs rot angle at exp start (deg)
HIERARCH ESO ADA GUID DEC = 0.00000 / 00:00:00.0 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 0.000000 / 00:00:00.0 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA POSANG = 0.00000 / Position angle at start
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET CHIP1 DATE = '30-08-2000' / Date of installation [YYYY-MM-DD]
HIERARCH ESO DET CHIP1 ID = 'CCD-59 ' / Detector chip identification
HIERARCH ESO DET CHIP1 NAME = 'EEV CCD-44' / Detector chip name
HIERARCH ESO DET CHIP1 NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP1 NY = 4096 / # of pixels along Y
HIERARCH ESO DET CHIP1 PSZX = 15.0 / Size of pixel in X
HIERARCH ESO DET CHIP1 PSZY = 15.0 / Size of pixel in Y
HIERARCH ESO DET CHIP1 X = 1 / X location in array
HIERARCH ESO DET CHIP1 Y = 1 / Y location in array
HIERARCH ESO DET CHIPS = 1 / # of chips in detector array
HIERARCH ESO DET DATE = '30-08-2000' / Installation date
HIERARCH ESO DET DEC = 0.00000000 / Apparent 00:00:00.0 DEC at start
HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction
HIERARCH ESO DET EXP DUMDIT = 0 / # of dummy readouts
HIERARCH ESO DET EXP NO = 231 / Unique exposure ID number
HIERARCH ESO DET EXP RDTTIME = 47.587 / image readout time
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP XFERTIM = 47.755 / image transfer time
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Type of frame
HIERARCH ESO DET ID = 'CCD FIERA - Rev 3.8' / Detector system Id
HIERARCH ESO DET NAME = 'ccdces - CES' / Name of detector system
HIERARCH ESO DET OUT2 CHIP = 1 / Chip to which the output belongs
HIERARCH ESO DET OUT2 CONAD = 1.29 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT2 GAIN = 0.78 / Conversion from electrons to ADU
HIERARCH ESO DET OUT2 ID = 'R ' / Output ID as from manufacturer
HIERARCH ESO DET OUT2 NAME = 'R ' / Description of output
HIERARCH ESO DET OUT2 NX = 1024 / valid pixels along X
HIERARCH ESO DET OUT2 NY = 4096 / valid pixels along Y
HIERARCH ESO DET OUT2 OVSCX = 50 / Overscan region in X
HIERARCH ESO DET OUT2 PRSCX = 50 / Prescan region in X
HIERARCH ESO DET OUT2 RON = 2.90 / Readout noise per output (e-)
HIERARCH ESO DET OUT2 X = 2048 / X location of output
HIERARCH ESO DET OUT2 Y = 1 / Y location of output
HIERARCH ESO DET OUTPUTS = 1 / # of outputs
HIERARCH ESO DET OUTREF = 0 / reference output
HIERARCH ESO DET RA = 0.00000000 / Apparent 00:00:00.0 RA at start
HIERARCH ESO DET READ CLOCK = 'R Half 100Kps M' / Readout clock pattern used
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed
HIERARCH ESO DET SHUT ID = 'CES shutter' / Shutter unique identifier
HIERARCH ESO DET SHUT TMCLOS = 0.052 / Time taken to close shutter
HIERARCH ESO DET SHUT TMOPEN = 0.037 / Time taken to open shutter
HIERARCH ESO DET SHUT TYPE = 'IRIS ' / type of shutter
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET TELE INT = 1.0 / Interval between two successive te
HIERARCH ESO DET TELE NO = 2 / # of sources active
HIERARCH ESO DET TLM1 END = 140.00 / Telemetry value at read completion
HIERARCH ESO DET TLM1 ID = 'CCD ' / ID of telemetry sensor
HIERARCH ESO DET TLM1 NAME = 'CCD Cold Plate' / Description of telemetry param
HIERARCH ESO DET TLM1 START = 140.00 / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 142.00 / Telemetry value at read completion
HIERARCH ESO DET TLM2 ID = 'CCD2 ' / ID of telemetry sensor
HIERARCH ESO DET TLM2 NAME = 'CCD Cold Plate2' / Description of telemetry para
HIERARCH ESO DET TLM2 START = 141.90 / Telemetry value at read start
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y
HIERARCH ESO DET WIN1 DIT1 = 300.007292 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 300.4518 / Dark current time
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 NX = 1124 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 4096 / # of pixels along Y
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 UIT1 = 300.000000 / user defined subintegration time
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO DPR CATG = 'SCIENCE ' / Observation category
HIERARCH ESO DPR TECH = 'SPECTRUM' / Observation technique
HIERARCH ESO DPR TYPE = 'OBJECT ' / Observation type
HIERARCH ESO INS DATE = '2000-06-16' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS1 DET1 CTMAX = 23.000 / Maximum count during exposure.
HIERARCH ESO INS1 DET1 CTMEAN = 9.4 / Average counts during exposure.
HIERARCH ESO INS1 DET1 CTMIN = 3.000 / Minimum count during exposure.
HIERARCH ESO INS1 DET1 CTRMS = 3.458 / RMS of counts during exposure.
HIERARCH ESO INS1 DET1 CTTOT = 2905.000 / Total counts during exposure.
HIERARCH ESO INS1 DET1 OFFDRK = 0.000 / Average dark background counts.
HIERARCH ESO INS1 DET1 OFFSKY = 0.000 / Average sky background counts.
HIERARCH ESO INS1 DET1 TMMEAN = 0.51 / Normalised mean exposure time.
HIERARCH ESO INS1 DET1 UIT = 1.000 / User defined Integration time [sec
HIERARCH ESO INS1 DID = 'ESO-VLT-DIC.CES_ICS-1.2' / Data dictionary for I
HIERARCH ESO INS1 GRAT1 ID = ' ' / Grating unique ID.
HIERARCH ESO INS1 GRAT1 NAME = ' ' / Grating device name.
HIERARCH ESO INS1 GRAT1 NO = -1 / GRAT1 slot number.
HIERARCH ESO INS1 GRAT1 TYPE = ' ' / GRAT1 element.
HIERARCH ESO INS1 GRAT1 WLEN = 539.6000000 / Grating central wavelength [nm].
HIERARCH ESO INS1 ID = 'CES/6.3.1.4' / Instrument ID.
HIERARCH ESO INS1 LAMP1 ID = 'FFL1 ' / Lamp ID.
HIERARCH ESO INS1 LAMP1 NAME = 'Ffl1_Lamp' / Lamp name.
HIERARCH ESO INS1 LAMP1 ST = F / Calibration lamp activated.
HIERARCH ESO INS1 LAMP1 SWSIM = T / If T, function is software simulat
HIERARCH ESO INS1 LAMP3 ID = 'TAL1 ' / Lamp ID.
HIERARCH ESO INS1 LAMP3 NAME = 'Tal1_Lamp' / Lamp name.
HIERARCH ESO INS1 LAMP3 ST = F / Calibration lamp activated.
HIERARCH ESO INS1 LAMP3 SWSIM = T / If T, function is software simulat
HIERARCH ESO INS1 MASK1 ID = 'hmsk ' / MASK1 unique ID.
HIERARCH ESO INS1 MASK1 LST = T / Left window open.
HIERARCH ESO INS1 MASK1 NAME = 'hmsk ' / MASK1 name.
HIERARCH ESO INS1 MODE = 'HCFA ' / Instrument mode used.
HIERARCH ESO INS1 NAME = 'CES/6.3.1.4' / Instrument NAME.
HIERARCH ESO INS1 OPTI1 ID = 'Free ' / CFA unique ID.
HIERARCH ESO INS1 OPTI1 NAME = 'Free ' / CFA name.
HIERARCH ESO INS1 OPTI1 NO = 1 / CFA slot number.
HIERARCH ESO INS1 OPTI1 SWSIM = T / If T, function is software simulat
HIERARCH ESO INS1 PATH = 'DEFAULT ' / Optical path used.
HIERARCH ESO INS1 PRSM1 ID = ' ' / Predisperser unique ID.
HIERARCH ESO INS1 PRSM1 NAME = ' ' / Predisperser device name.
HIERARCH ESO INS1 PRSM1 NO = -1 / PRSM1 slot number.
HIERARCH ESO INS1 PRSM1 TYPE = ' ' / PRSM1 element.
HIERARCH ESO INS1 PRSM1 WLEN = 539.1817077 / Predisperser central wavelength [n
HIERARCH ESO INS1 SHUT1 ID = 'BEXS ' / Shutter ID.
HIERARCH ESO INS1 SHUT1 NAME = 'ExpMeterSh' / Shutter name.
HIERARCH ESO INS1 SHUT1 ST = F / Shutter open.
HIERARCH ESO INS1 SIGNAL1 ID = 'pcoll ' / SIGNAL1 unique ID.
HIERARCH ESO INS1 SIGNAL1 NAME = 'pcoll ' / SIGNAL1 name.
HIERARCH ESO INS1 SIGNAL1 ST = 'T ' / SIGNAL1 status.
HIERARCH ESO INS1 SIGNAL2 ID = 'scoll ' / SIGNAL2 unique ID.
HIERARCH ESO INS1 SIGNAL2 NAME = 'scoll ' / SIGNAL2 name.
HIERARCH ESO INS1 SIGNAL2 ST = 'T ' / SIGNAL2 status.
HIERARCH ESO INS1 SLIT1 WID = 1.05 / SLIT width [arcsec].
HIERARCH ESO INS1 SLIT2 WID = 1.05 / SLIT width [arcsec].
HIERARCH ESO INS1 SLIT3 NAME = ' ' / Image Slicer name [only for Entran
HIERARCH ESO INS1 SLIT3 NO = -1 / Image Slicer number [only for Entr
HIERARCH ESO INS1 SLIT3 WID = 0.11 / SLIT width [arcsec].
HIERARCH ESO INS1 SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS2 ADC1 DEC = -94816.011628 / -~~:~~:~~.~ DEC (J2000) pointing
HIERARCH ESO INS2 ADC1 END = 195.5650 / Position angle at end [deg].
HIERARCH ESO INS2 ADC1 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS2 ADC1 RA = 113640.456174 / ~~:~~:~~.~ RA (J2000) pointing [d
HIERARCH ESO INS2 ADC2 DEC = -94816.011628 / -~~:~~:~~.~ DEC (J2000) pointing
HIERARCH ESO INS2 ADC2 END = 186.6420 / Position angle at end [deg].
HIERARCH ESO INS2 ADC2 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS2 ADC2 RA = 113640.456174 / ~~:~~:~~.~ RA (J2000) pointing [d
HIERARCH ESO INS2 ADCS ID = 'IN ' / ADC slide identification.
HIERARCH ESO INS2 ADCS NAME = 'IN ' / ADC slide position.
HIERARCH ESO INS2 ADCS NO = 2 / ADC slide position.
HIERARCH ESO INS2 ADCS TYPE = 'ADC ' / Type of component.
HIERARCH ESO INS2 LAMP3 SWSIM= T / If T, function is software simulat
HIERARCH ESO INS2 LAMP7 ST = T / Lamp activated.
HIERARCH ESO INS2 MIRR1 ID = 'NONE ' / Mirror unique ID.
HIERARCH ESO INS2 MIRR1 NAME = 'NONE ' / Mirror name.
HIERARCH ESO INS2 MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS2 OPTI2 ID = 'CES ' / OPTIi unique ID.
HIERARCH ESO INS2 OPTI2 NAME = 'CES ' / OPTIi name.
HIERARCH ESO INS2 OPTI2 NO = 2 / OPTIi slot number.
HIERARCH ESO INS2 OPTI2 TYPE = 'FIBHEAD ' / OPTIi element.
HIERARCH ESO INS2 OPTI3 ID = 'OUT ' / OPTIi unique ID.
HIERARCH ESO INS2 OPTI3 NAME = 'OUT ' / OPTIi name.
HIERARCH ESO INS2 OPTI3 NO = 2 / OPTIi slot number.
HIERARCH ESO INS2 OPTI3 TYPE = 'COVER ' / OPTIi element.
HIERARCH ESO INS2 OPTI4 ID = 'OUT ' / OPTIi unique ID.
HIERARCH ESO INS2 OPTI4 NAME = 'OUT ' / OPTIi name.
HIERARCH ESO INS2 OPTI4 NO = 1 / OPTIi slot number.
HIERARCH ESO INS2 OPTI4 TYPE = 'I2CELL ' / OPTIi element.
HIERARCH ESO INS2 OPTI5 ID = 'THAR2 ' / OPTIi unique ID.
HIERARCH ESO INS2 OPTI5 NAME = 'THAR2 ' / OPTIi name.
HIERARCH ESO INS2 OPTI5 NO = 6 / OPTIi slot number.
HIERARCH ESO INS2 OPTI5 TYPE = 'LAMPSELA' / OPTIi element.
HIERARCH ESO INS2 OPTI6 ID = 'THAR2 ' / OPTIi unique ID.
HIERARCH ESO INS2 OPTI6 NAME = 'THAR2 ' / OPTIi name.
HIERARCH ESO INS2 OPTI6 NO = 6 / OPTIi slot number.
HIERARCH ESO INS2 OPTI6 TYPE = 'LAMPSELB' / OPTIi element.
HIERARCH ESO INS2 ROT1 ENC = 71 / Absolute position [Enc].
HIERARCH ESO INS2 ROT1 POS = 0.023 / Density [density].
HIERARCH ESO INS2 SENSOR1 ID = 'cfas ' / Sensor device unique id.
HIERARCH ESO INS2 SENSOR1 NAME= 'CFA temp. sensors' / Sensor device common name.
HIERARCH ESO INS2 SENSOR2 ID = 'iods ' / Sensor device unique id.
HIERARCH ESO INS2 SENSOR2 NAME= 'I2 cell temp. ctrl' / Sensor device common name
HIERARCH ESO INS2 TEMP1 DETCOEF= 0.694258 / RMS of linear regression slope.
HIERARCH ESO INS2 TEMP1 GRAD = 0.000756 / Linear regression slope.
HIERARCH ESO INS2 TEMP1 ID = 'CFAS ' / Temperature sensor ID.
HIERARCH ESO INS2 TEMP1 LRCONST= 13.522857 / Linear regression constant.
HIERARCH ESO INS2 TEMP1 LRRMS= 0.060199 / Linear regression RMS.
HIERARCH ESO INS2 TEMP1 MAX = 13.820000 / Maximum value.
HIERARCH ESO INS2 TEMP1 MEAN = 13.704286 / Average value.
HIERARCH ESO INS2 TEMP1 MIN = 13.460000 / Minimum value.
HIERARCH ESO INS2 TEMP1 NAME = 'HCFA air temperature' / Temperature sensor name.
HIERARCH ESO INS2 TEMP1 RMS = 0.108872 / RMS of samples over exposure.
HIERARCH ESO INS2 TEMP1 VAL = 13.780 / Temperature sensor numeric value.
HIERARCH ESO INS2 TEMP2 DETCOEF= 0.041667 / RMS of linear regression slope.
HIERARCH ESO INS2 TEMP2 GRAD = 0.000179 / Linear regression slope.
HIERARCH ESO INS2 TEMP2 ID = 'IODS ' / Temperature sensor ID.
HIERARCH ESO INS2 TEMP2 LRCONST= 139.700000 / Linear regression constant.
HIERARCH ESO INS2 TEMP2 LRRMS= 0.102768 / Linear regression RMS.
HIERARCH ESO INS2 TEMP2 MAX = 139.800000 / Maximum value.
HIERARCH ESO INS2 TEMP2 MEAN = 139.742857 / Average value.
HIERARCH ESO INS2 TEMP2 MIN = 139.500000 / Minimum value.
HIERARCH ESO INS2 TEMP2 NAME = 'Iodine cell temperature' / Temperature sensor na
HIERARCH ESO INS2 TEMP2 RMS = 0.104978 / RMS of samples over exposure.
HIERARCH ESO INS2 TEMP2 VAL = 139.800 / Temperature sensor numeric value.
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.10' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 0 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = -1084191703 / Observation block ID
HIERARCH ESO OBS NAME = 'stdHR4468' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 51011 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '60.A-9111(B)' / ESO program identification
HIERARCH ESO OBS START = '2004-05-15T04:01:38' / OB start time
HIERARCH ESO OBS TARG NAME = 'HR4468 ' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OCS DET IMGNAME = 'CES_hcfa_obs_all' / Data File Name.
HIERARCH ESO TEL AIRM END = 1.586 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.550 / Airmass at start
HIERARCH ESO TEL ALT = 40.109 / Alt angle at start (deg)
HIERARCH ESO TEL AMBI FWHM END= 0.68 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI FWHM START= 0.59 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI PRES END= 770.80 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI PRES START= 771.00 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI RHUM = 19. / Observatory ambient relative humi
HIERARCH ESO TEL AMBI TEMP = 11.15 / Observatory ambient temperature qu
HIERARCH ESO TEL AMBI WINDDIR= 45. / Observatory ambient wind directio
HIERARCH ESO TEL AMBI WINDSP = 4.65 / Observatory ambient wind speed que
HIERARCH ESO TEL AZ = 462.477 / Az angle at start (deg) S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = 'not set ' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.827 / Focal length (m)
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale (arcsec/mm)
HIERARCH ESO TEL FOCU VALUE = 20.350 / M2 setting (mm)
HIERARCH ESO TEL GEOELEV = 2400. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT = -29.2584 / Tel geo latitute (+=North) (deg)
HIERARCH ESO TEL GEOLON = -70.7345 / Tel geo longitude (+=East) (deg)
HIERARCH ESO TEL ID = 'v 5.55+ ' / TCS version number
HIERARCH ESO TEL MOON DEC = 1.61677 / 01:37:00.3 DEC (J2000) (deg)
HIERARCH ESO TEL MOON RA = 10.232907 / 00:40:55.8 RA (J2000) (deg)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = 119.866 / Parallactic angle at end (deg)
HIERARCH ESO TEL PARANG START= 120.171 / Parallactic angle at start (deg)
HIERARCH ESO TEL TARG ALPHA = 113640.910 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparent
HIERARCH ESO TEL TARG DELTA = -94808.100 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000.000 / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM= 'J ' / Epoch system (default J=Julian)
HIERARCH ESO TEL TARG EQUINOX= 2000.000 / Equinox
HIERARCH ESO TEL TARG PARALLAX= 0.000 / Parallax
HIERARCH ESO TEL TARG PMA = -3.600000 / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0.680000 / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 21.700 / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = -1.00 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.8' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 1 / Exposure number within template
HIERARCH ESO TPL ID = 'CES_hcfa_obs_all' / Template signature ID
HIERARCH ESO TPL NAME = 'Science exposures' / Template name
HIERARCH ESO TPL NEXP = 1 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ = 'CES_obs_all.seq' / Sequencer script
HIERARCH ESO TPL START = '2004-05-15T04:04:05' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 1.2 $' / Version of the template
END
|
SIMPLE = T / Standard FITS format (NOST-100.0)
BITPIX = 16 / # of bits storing pix values
NAXIS = 2 / # of axes in frame
NAXIS1 = 1124 / # pixels/axis
NAXIS2 = 4096 / # pixels/axis
ORIGIN = 'ESO ' / European Southern Observatory
DATE = '2003-08-17T05:25:53.070' / UT date when this file was written
CRVAL1 = 1.0 / value of ref pixel
CRPIX1 = 1.0 / Ref. pixel of center of rotation
CDELT1 = 1.0 / Binning factor
CTYPE1 = 'PIXEL ' / Pixel coordinate system
CRVAL2 = 1.0 / value of ref pixel
CRPIX2 = 1.0 / Ref. pixel of center of rotation
CDELT2 = 1.0 / Binning factor
CTYPE2 = 'PIXEL ' / Pixel coordinate system
BSCALE = 1.0 / pixel=FITS*BSCALE+BZERO
BZERO = 32768.0 / pixel=FITS*BSCALE+BZERO
MJD-OBS = 52868.21240531 / MJD start (2003-08-17T05:05:51.819)
DATE-OBS= '2003-08-17T05:05:51.818' / Date of observation
EXPTIME = 1200.0073 / Total integration time
EXTEND = F / Extension may be present
OBJECT = 'BD-06-281' / Original target
INSTRUME= 'CES/5.7 ' / Instrument used
OBSERVER= 'UNKNOWN ' / Name of observer
PI-COI = 'UNKNOWN ' / Name(s) of proposer(s)
TELESCOP= 'ESO-3P6 ' / ESO Telescope Name
RA = 22.492760 / 01:29:58.2 RA (J2000) pointing (deg)
DEC = -5.73467 / -05:44:04.8 DEC (J2000) pointing (deg)
EQUINOX = 2000. / Standard FK5 (years)
RADECSYS= 'FK5 ' / Coordinate reference frame
LST = 79409.376 / 22:03:29.376 LST at start (sec)
UTC = 18345.000 / 05:05:45.000 UTC at start (sec)
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.7' / OBS Dictionary
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS EXECTIME = 179 / Expected execution time
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PI-COI ID = 51011 / ESO internal PI-COI ID
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS NAME = 'BD-06-281' / OB name
HIERARCH ESO OBS ID = 1272800497 / Observation block ID
HIERARCH ESO OBS PROG ID = '60.A-9111(B)' / ESO program identification
HIERARCH ESO OBS START = '2003-08-17T05:01:49' / OB start time
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OBS TARG NAME = 'BD-06-281' / OB target name
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.4' / Data dictionary for TPL
HIERARCH ESO TPL ID = 'CES_Observation' / Template signature ID
HIERARCH ESO TPL NAME = 'CES: science exposure' / Template name
HIERARCH ESO TPL PRESEQ = 'CES_Observation.seq' / Sequencer script
HIERARCH ESO TPL START = '2003-08-17T05:05:41' / TPL start time
HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template
HIERARCH ESO TPL NEXP = 1 / Number of exposures within templat
HIERARCH ESO TPL EXPNO = 1 / Exposure number within template
HIERARCH ESO DPR CATG = 'SCIENCE ' / Observation category
HIERARCH ESO DPR TECH = 'SPECTRUM' / Observation technique
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL ID = 'v 5.32 ' / TCS version number
HIERARCH ESO TEL DATE = 'not set ' / TCS installation date
HIERARCH ESO TEL ALT = 35.951 / Alt angle at start (deg)
HIERARCH ESO TEL AZ = 254.615 / Az angle at start (deg) S=0,W=90
HIERARCH ESO TEL GEOELEV = 2400. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT = -29.2584 / Tel geo latitute (+=North) (deg)
HIERARCH ESO TEL GEOLON = -70.7345 / Tel geo longitude (+=East) (deg)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.827 / Focal length (m)
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale (arcsec/mm)
HIERARCH ESO TEL FOCU VALUE = 0.000 / M2 setting (mm)
HIERARCH ESO TEL PARANG START= -122.289 / Parallactic angle at start (deg)
HIERARCH ESO TEL AIRM START = 1.700 / Airmass at start
HIERARCH ESO TEL AMBI FWHM START= 0.78 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI PRES START= 776.10 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI WINDSP = 4.25 / Observatory ambient wind speed que
HIERARCH ESO TEL AMBI WINDDIR= 166. / Observatory ambient wind directio
HIERARCH ESO TEL AMBI RHUM = 15. / Observatory ambient relative humi
HIERARCH ESO TEL AMBI TEMP = 16.80 / Observatory ambient temperature qu
HIERARCH ESO TEL MOON RA = 22.988963 / 01:31:57.3 RA (J2000) (deg)
HIERARCH ESO TEL MOON DEC = 7.00451 / 07:00:16.2 DEC (J2000) (deg)
HIERARCH ESO TEL TH M1 TEMP = -1.00 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL TARG ALPHA = 12957.560 / Alpha coordinate for the target
HIERARCH ESO TEL TARG DELTA = -54421.600 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000.000 / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM= 'J ' / Epoch system (default J=Julian)
HIERARCH ESO TEL TARG EQUINOX= 2000.000 / Equinox
HIERARCH ESO TEL TARG PMA = 0.000000 / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0.000000 / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0.000 / Radial velocity
HIERARCH ESO TEL TARG PARALLAX= 0.000 / Parallax
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparent
HIERARCH ESO TEL PARANG END = -123.942 / Parallactic angle at end (deg)
HIERARCH ESO TEL AIRM END = 1.548 / Airmass at end
HIERARCH ESO TEL AMBI FWHM END= 0.69 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI PRES END= 776.10 / Observatory ambient air pressure q
HIERARCH ESO ADA ABSROT START= 89.96976 / Abs rot angle at exp start (deg)
HIERARCH ESO ADA POSANG = 0.00000 / Position angle at start
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA ABSROT END = 89.96976 / Abs rot angle at exp end (deg)
HIERARCH ESO ADA GUID RA = 0.000000 / 00:00:00.0 Guide star RA J2000
HIERARCH ESO ADA GUID DEC = 0.00000 / 00:00:00.0 Guide star DEC J2000
HIERARCH ESO INS SWSIM = 'NORMAL ' / software simulation
HIERARCH ESO INS ID = 'CES/5.7 ' / Instrument ID
HIERARCH ESO INS NAME = 'CES/5.7 ' / Instrument NAME
HIERARCH ESO INS MASK1 ID = 'hmsk ' / MASK1 unique ID
HIERARCH ESO INS MASK1 NAME = 'hmsk ' / MASK1 name
HIERARCH ESO INS MASK1 LST = T / Left window open
HIERARCH ESO INS SIGNAL1 ID = 'pcoll ' / SIGNAL1 unique ID
HIERARCH ESO INS SIGNAL1 NAME= 'pcoll ' / SIGNAL1 name
HIERARCH ESO INS SIGNAL1 ST = 'T ' / SIGNAL1 status
HIERARCH ESO INS SIGNAL2 ID = 'scoll ' / SIGNAL2 unique ID
HIERARCH ESO INS SIGNAL2 NAME= 'scoll ' / SIGNAL2 name
HIERARCH ESO INS SIGNAL2 ST = 'T ' / SIGNAL2 status
HIERARCH ESO INS SLIT2 WID = 1.00 / Slit width (arcsec)
HIERARCH ESO INS SLIT1 WID = 1.00 / Slit width (arcsec)
HIERARCH ESO INS SLIT3 WID = 0.11 / Slit width (arcsec)
HIERARCH ESO INS SLIT3 NAME = ' ' / Image Slicer name (only for Entran
HIERARCH ESO INS SLIT3 NO = -1 / Image Slicer number ( only for Ent
HIERARCH ESO INS GRAT1 ID = ' ' / Grating unique ID
HIERARCH ESO INS GRAT1 NAME = ' ' / Grating device name
HIERARCH ESO INS GRAT1 NO = -1 / GRAT1 slot number
HIERARCH ESO INS GRAT1 TYPE = ' ' / GRAT1 element
HIERARCH ESO INS GRAT1 WLEN = 588.9000000 / Grating central wavelength
HIERARCH ESO INS PRSM1 ID = ' ' / Predisperser unique ID
HIERARCH ESO INS PRSM1 NAME = ' ' / Predisperser device name
HIERARCH ESO INS PRSM1 NO = -1 / PRSM slot number
HIERARCH ESO INS PRSM1 TYPE = ' ' / PRSM1 element
HIERARCH ESO INS PRSM1 WLEN = 588.9773300 / Predisperser central wavelength
HIERARCH ESO INS DET1 CTTOT = 3383290.000 / Total counts during exposure
HIERARCH ESO INS DET1 UIT = 1.000 / User defined Integration time
HIERARCH ESO INS DET1 OFFDRK = 0.000 / Average dark background counts
HIERARCH ESO INS DET1 OFFSKY = 0.000 / Average sky background counts
HIERARCH ESO INS SHUT1 ID = 'BEXS ' / Shutter ID
HIERARCH ESO INS SHUT1 NAME = 'ExpMeterSh' / Shutter name
HIERARCH ESO INS SHUT1 ST = F / Shutter open
HIERARCH ESO INS OPTI1 ID = 'Free ' / CFA unique ID
HIERARCH ESO INS OPTI1 NAME = 'Free ' / CFA name
HIERARCH ESO INS OPTI1 NO = 1 / CFA slot number
HIERARCH ESO INS LAMP1 ID = 'FFL1 ' / Lamp ID
HIERARCH ESO INS LAMP1 NAME = 'Ffl1_Lamp' / Lamp name
HIERARCH ESO INS LAMP1 ST = F / Calibration lamp activated
HIERARCH ESO INS LAMP3 ID = 'TAL1 ' / Lamp ID
HIERARCH ESO INS LAMP3 NAME = 'Tal1_Lamp' / Lamp name
HIERARCH ESO INS LAMP3 ST = F / Calibration lamp activated
HIERARCH ESO DET ID = 'CCD FIERA - Rev 2.87' / Detector system Id
HIERARCH ESO DET NAME = 'ccdces - CES' / Name of detector system
HIERARCH ESO DET DATE = '30-08-2000' / Installation date
HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET RA = 0.00000000 / Apparent 00:00:00.0 RA at start
HIERARCH ESO DET DEC = 0.00000000 / Apparent 00:00:00.0 DEC at start
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET CHIPS = 1 / # of chips in detector array
HIERARCH ESO DET CHIP1 ID = 'CCD-59 ' / Detector chip identification
HIERARCH ESO DET CHIP1 NAME = 'EEV CCD-44' / Detector chip name
HIERARCH ESO DET CHIP1 DATE = '30-08-2000' / Date of installation [YYYY-MM-DD]
HIERARCH ESO DET CHIP1 X = 1 / X location in array
HIERARCH ESO DET CHIP1 Y = 1 / Y location in array
HIERARCH ESO DET CHIP1 NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP1 NY = 4096 / # of pixels along Y
HIERARCH ESO DET CHIP1 PSZX = 15.0 / Size of pixel in X
HIERARCH ESO DET CHIP1 PSZY = 15.0 / Size of pixel in Y
HIERARCH ESO DET EXP NO = 3971 / Unique exposure ID number
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP DUMDIT = 0 / # of dummy readouts
HIERARCH ESO DET EXP RDTTIME = 47.590 / image readout time
HIERARCH ESO DET EXP XFERTIM = 47.723 / image transfer time
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed
HIERARCH ESO DET READ CLOCK = 'R Half 100Kps M' / Readout clock pattern used
HIERARCH ESO DET OUTPUTS = 1 / # of outputs
HIERARCH ESO DET OUTREF = 0 / reference output
HIERARCH ESO DET OUT2 ID = 'R ' / Output ID as from manufacturer
HIERARCH ESO DET OUT2 NAME = 'R ' / Description of output
HIERARCH ESO DET OUT2 CHIP = 1 / Chip to which the output belongs
HIERARCH ESO DET OUT2 X = 2048 / X location of output
HIERARCH ESO DET OUT2 Y = 1 / Y location of output
HIERARCH ESO DET OUT2 NX = 1024 / valid pixels along X
HIERARCH ESO DET OUT2 NY = 4096 / valid pixels along Y
HIERARCH ESO DET OUT2 PRSCX = 50 / Prescan region in X
HIERARCH ESO DET OUT2 OVSCX = 50 / Overscan region in X
HIERARCH ESO DET OUT2 CONAD = 1.29 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT2 RON = 2.90 / Readout noise per output (e-)
HIERARCH ESO DET OUT2 GAIN = 0.78 / Conversion from electrons to ADU
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Type of frame
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 NX = 1124 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 4096 / # of pixels along Y
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 UIT1 = 1200.000000 / user defined subintegration time
HIERARCH ESO DET WIN1 DIT1 = 1200.007257 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 1200.4564 / Dark current time
HIERARCH ESO DET SHUT TYPE = 'IRIS ' / type of shutter
HIERARCH ESO DET SHUT ID = 'CES shutter' / Shutter unique identifier
HIERARCH ESO DET SHUT TMOPEN = 0.037 / Time taken to open shutter
HIERARCH ESO DET SHUT TMCLOS = 0.051 / Time taken to close shutter
HIERARCH ESO DET TELE INT = 1.0 / Interval between two successive te
HIERARCH ESO DET TELE NO = 2 / # of sources active
HIERARCH ESO DET TLM1 NAME = 'CCD Cold Plate' / Description of telemetry param
HIERARCH ESO DET TLM1 ID = 'CCD ' / ID of telemetry sensor
HIERARCH ESO DET TLM1 START = 140.10 / Telemetry value at read start
HIERARCH ESO DET TLM1 END = 140.00 / Telemetry value at read completion
HIERARCH ESO DET TLM2 NAME = 'CCD Cold Plate2' / Description of telemetry para
HIERARCH ESO DET TLM2 ID = 'CCD2 ' / ID of telemetry sensor
HIERARCH ESO DET TLM2 START = 142.00 / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 141.90 / Telemetry value at read completion
END
|
![[ ESO ]](/images/eso-logo.gif){kind=logo}
![[Observing]](/images/icon-observing.gif){kind=icon}
![[ESO La Silla]](/images/icon-lasilla.gif){kind=icon}
![[ESO]](/images/icon-home.gif){kind=icon}
![[Index]](/images/icon-index.gif){kind=icon}
![[Search]](/images/icon-search.gif){kind=icon}
![[Help]](/images/icon-help.gif){kind=icon}
![[News]](/images/icon-whatsnew.gif){kind=icon}