*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 22 Dec 2003   17:49:13   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 22 Dec 2003   17:49:44   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031222 IN 12 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 223.94 stddev =   9.02
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_12_40_031222 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      1.00    1527.5    1527.6    1217.6      0.08      0.04      1.25
        2      2.00    3040.4    3039.5    2351.7      0.01     -0.04      1.29
        3      4.00    6059.7    6058.5    4528.4     -0.13     -0.15      1.34
        4      6.00    9081.4    9080.7    7140.5     -0.15     -0.15      1.27
        5      9.00   13621.4   13621.4   10651.3     -0.11     -0.10      1.28
        6     12.00   18164.8   18165.8   13799.2     -0.08     -0.05      1.32
        7     15.00   22717.9   22714.6   16924.9     -0.01     -0.00      1.34
        8     20.00   30307.1   30304.4   23394.9      0.06      0.07      1.30
        9     25.00   37912.7   37909.7   29004.9      0.14      0.16      1.31
       10     30.00   45521.2   45520.9   35613.5      0.20      0.23      1.28
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 1973 to 58799 e-
      Average count rate measured: 1514 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.29 +/-   0.01 e-/ADU
 
      RON    =  11.65 +/-   0.10 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.011 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.21/-0.15 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay