*** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 09 Dec 2003   11:56:43   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 09 Dec 2003   11:57:14   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031209 IN 12 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 224.10 stddev =   9.04
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_12_40_031209 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      1.00    1530.5    1531.4    1219.9      0.15      0.13      1.25
        2      2.00    3043.9    3044.1    2306.9     -0.10     -0.12      1.32
        3      4.00    6076.0    6074.5    4611.6     -0.14     -0.17      1.32
        4      6.00    9107.0    9110.1    6829.6     -0.17     -0.13      1.33
        5      9.00   13663.6   13660.9   10817.8     -0.11     -0.12      1.26
        6     12.00   18226.0   18221.7   18956.1     -0.05     -0.07      0.96
        7     15.00   22787.8   22790.1   17168.5     -0.02      0.00      1.33
        8     20.00   30410.6   30406.8   23246.5      0.08      0.08      1.31
        9     25.00   38032.9   38034.9   28665.9      0.14      0.16      1.33
       10     30.00   45680.9   45676.2   35544.0      0.23      0.24      1.29
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 1998 to 59603 e-
      Average count rate measured: 1519 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.30 +/-   0.06 e-/ADU
 
      RON    =  11.80 +/-   0.58 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.009 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.23/-0.17 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay