*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 10 Oct 2003   13:44:21   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 10 Oct 2003   13:44:52   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031010 IN 12 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 222.07 stddev =   9.00
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_12_40_031010 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      1.00    1581.9    1582.3    1284.8      0.14      0.16      1.23
        2      2.00    3128.8    3130.0    2509.9     -0.16     -0.13      1.25
        3      4.00    6235.7    6236.0    4865.2     -0.15     -0.15      1.28
        4      6.00    9342.1    9343.5    6931.8     -0.14     -0.13      1.35
        5      9.00   14006.4   14003.8   10481.2     -0.10     -0.13      1.34
        6     12.00   18673.1   18674.4   14055.3     -0.07     -0.07      1.33
        7     15.00   23350.9   23349.3   18643.5     -0.00     -0.01      1.25
        8     20.00   31154.7   31156.9   23589.5      0.09      0.09      1.32
        9     25.00   38959.9   38962.0   30536.5      0.15      0.15      1.28
       10     30.00   46794.2   46788.8   36786.0      0.25      0.23      1.27
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2018 to 59696 e-
      Average count rate measured: 1555 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.28 +/-   0.01 e-/ADU
 
      RON    =  11.49 +/-   0.12 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.016 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.24/-0.15 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay