*** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 16 Sep 2003 15:22:28 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 16 Sep 2003 15:22:57 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#40 TAKEN ON 030916 IN 12 MODE ========================================================== BIAS ==== 5 biases at start test: average = 219.38 stddev = 8.99 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_12_40_030916 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.00 1618.1 1618.7 1305.3 0.12 0.09 1.24 2 2.00 3204.2 3205.3 2483.5 -0.03 -0.05 1.29 3 4.00 6371.9 6377.4 4865.5 -0.19 -0.15 1.31 4 6.00 9553.1 9547.8 7322.4 -0.14 -0.18 1.30 5 9.00 14320.3 14323.1 10923.8 -0.11 -0.10 1.31 6 12.00 19096.5 19095.3 14506.4 -0.06 -0.06 1.32 7 15.00 23875.2 23874.5 18490.8 -0.01 -0.01 1.29 8 20.00 31848.2 31851.2 24531.4 0.06 0.08 1.30 9 25.00 39837.7 39834.2 30465.2 0.15 0.15 1.31 10 30.00 47831.8 47836.9 37502.1 0.22 0.23 1.28 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 2083 to 61580 e- Average count rate measured: 1590 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.29 +/- 0.01 e-/ADU RON = 11.57 +/- 0.07 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.016 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.22/-0.19 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay