*** MIDAS logfile (vers. 02FEBpl1.0) *** Th, 14 Aug 2003 13:40:59 Page 1 *** MIDAS logfile (vers. 02FEBpl1.0) *** Th, 14 Aug 2003 13:41:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#40 TAKEN ON 030814 IN 32 MODE ========================================================== BIAS ==== 5 biases at start test: average = 86.84 stddev = 10.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_32_40_030814 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.00 1930.1 1929.6 1830.2 0.09 0.09 1.05 2 2.00 3826.3 3824.8 3655.7 -0.09 -0.11 1.05 3 4.00 7616.0 7618.2 6951.4 -0.18 -0.17 1.10 4 6.00 11412.6 11414.9 10763.0 -0.16 -0.15 1.06 5 9.00 17113.0 17112.9 15979.5 -0.11 -0.11 1.07 6 12.00 22821.3 22824.8 21548.3 -0.05 -0.05 1.06 7 15.00 28541.7 28535.1 26839.5 0.01 -0.01 1.06 8 20.00 38071.9 38081.3 35157.2 0.08 0.10 1.08 9 25.00 47626.7 47628.0 44651.3 0.17 0.17 1.07 10 30.00 57182.8 57180.7 53700.6 0.24 0.23 1.06 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 2061 to 61064 e- Average count rate measured: 1901 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.07 +/- 0.00 e-/ADU RON = 10.96 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.015 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.23/-0.17 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay Bias variation (%) = -52.2868131868 RON(ADU) variation (%) = 83.2321428571 CF variation (%) = -20.2985074627 Count Rate variation (%) = -4.9652 Blight Correc.Factor by day = 1.1922